KOLSOL NF-8209 Network Cable Tester Tracker, 4 in 1 PoE Tester with NCV & Lamp
A new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode.
It includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.
Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch.
Measure cable length and locate fault distance accurately for lan cable. the range is 120m.That means it's equipped with the most powerful cable location technologies for any work environment.
Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).
- Transmitter Specification Wire-map Cable type: CAT5、CAT6 (STP & UTP) Test with switch directly: Yes Max range: 600m Length Cable type: CAT5、CAT6 (STP & UTP) Test range: 2~200m Accuracy: 1. 6m Breakage location: Yes Scan part Cable type: CAT5、CAT6 (STP & UTP) Max. signal voltage: 8Vp-p Frequency: 130KHz AC filter: Yes Max range: 600m POE part Test range: DC 5~60V standard / non-standard PoE switch Voltage display: Yes PSE type: IEE?E 802. 3af/at LCD display: 128*64 Dot-matrix with backlight Power supply: AAA*3 Low battery warning: 2. 7V Auto-off time: 15min、30min、60min、OFF Voltage protection: DC48V 5mA Max working current: Receiver specification Sensitivity adjustable: Yes AC Voltage detecting: Yes Lamp: Yes Battery type: 9V*1 Low battery warning: 6 0. 5V Max working current: <150mA Remote specification Wire-map Port: RJ45 Voltage protection: DC48V 5mA